Skip to content
Sign in
  • There are no suggestions because the search field is empty.

How do I Tape and Label the Hosts?

Here, there are a few ways to tape down and label NUC or Pi hosts, depending on the type of school the customer is based at.

Table of Contents

For Pi Hosts

  1. Use Red Tape on the shorter sides of the enclosure. Apply them on the circles near the corners on the Pi before cutting off the strip.
  2. Take the Hosts Stickers (it has DO NOT REMOVE in green) and, depending on the customer's school, and place it between 2 USB ports.
    1. Highschool: place it upright
    2. University: place it upside down
  3. Take the green "Pi Connect to Router" sticker and place it vertically on the Ethernet port where the green square is pointing downwards.

For NUC Hosts

  1. Use the Red Tape on the shorter sides if the NUC. Tape from one circle to another vertically and NOT across the power button.
  2. Take the Hosts Stickers (it has DO NOT REMOVE in green) and place it above the letter "c" of the logo and on the top middle of the host.
  3. Take the green "NUC Connect to Router" sticker and place it horizontally upright on the Ethernet port where the green square is placed above the ethernet port.